Now you don’t need to remember any password or complicated code
with Keewifi Router .
What's that :
Keewifi
Router is a portable device which doesn’t need any password or code to
activate. This device is small in size with flexible compartment. Users don’t
need to remember any password or complicated code to run the router. Instead,
insert it into the main device for faster routing. Replace the conventional
WiFi interface for routing.
what make 's it different from the other routers
One or
multiple NICs supporting Fast Ethernet or Gigabit Ethernet integrated into the
main SoC
One or
multiple WNICs supporting a part of the IEEE 802.11-standard family also
integrated into the main SoC or as separate chips on the printed circuit board.
It also can be a distinct card connected over a MiniPCI or MiniPCIe interface.
So far
the PHY-Chips for the WNICs are generally distinct chips on the PCB. Dependent
on the mode the WNIC supports, i.e. 1T1R, 2T2R or 3T3R, one WNIC have up to 3
PHY-Chips connected to it. Each PHY-Chip is connected to a Hirose
U.FL-connector on the PCB. A so-called pigtail cable connects the Hirose U.FL either
to a RF connector, in which case the antenna can be changed or directly to the
antenna, in which case it is integrated into the casing. Common are single-band
(i.e. only for 2.4 GHz or only for 5 GHz) and dual-band (i.e. for 2.4 and 5
GHz) antennas.
Often an
Ethernet switch supporting Gigabit Ethernet or Fast Ethernet, with support for
IEEE 802.1Q, integrated into the main SoC (MediaTek SoCs) or as separate Chip
on the PCB.
Some
wireless routers come with either xDSL modem, DOCSIS modem, LTE modem, or fiber
optic modem integrated.
IEEE
802.11n compliant or ready.
Some
dual-band wireless routers operate the 2.4 GHz and 5 GHz bands simultaneously.
Some high
end dual-band wireless routers have data transfer rates of at most 300 Mbit/s
(For 2.4 GHz band) and 450 Mbit/s (For 5 GHz band).[1]
The Wi-Fi
clone button simplifies Wi-Fi configuration and builds a seamless unified home
network, enabling Super Range Extension, which means it can automatically copy
the SSID and Password of your router.[2]
Some
wireless routers have 1 or 2 USB port(s). For wireless routers having 1 USB
port, it is designated for either printer or desktop/mobile external hard disk
drive. For wireless routers having 2 USB ports, one is designated for the
printer and the other one is designated for either desktop or mobile external
hard disk drive.[3]
Some
wireless routers have a USB port specifically designed for connecting mobile
broadband modem,[4] aside from connecting the wireless router to an Ethernet
with xDSL or cable modem. So, can be inserted a mobile broadband USB adapter
into the router to share the mobile broadband Internet connection through the
wireless network.
For additional info
or buy
you can visit
0 comments:
Post a Comment